Products > Software > GART-2000® CE/NT Release Notes

GART-2000® CE/NT Release Notes

Here you can find information about the major GART-2000® releases.

Version 3.01.02 - 27.07.2011

Import/Export Formats: ASCII-GB for import/export to Kivid (ALKIS)
Import/Export Formats: DXF import with "Digitale Bundeswasserstraßenkarte"
Geoid models: EST-Geoid2003 for Estonia
Totalstation: Selection reflector with Leica TS11/TS15

Version 3.01.01 - 11.07.2011

GNSS: Interface for TOPCON Hiper II
Totalstation: Interface for Leica TS11/15 (onboard and controller)
Totalstation: Levelling with CE
Innovation: ALKIS

Version 3.01.00 - 08.03.2011

GNSS: NTRIP options for Leica Viva
GNSS: Selection of satellites with Leica Viva
Transformation on Ref. Line: Point selection by map

Version 3.00.09 - 21.12.2010

Interface: Echo Sounding with GNSS measurements available
NDS Version: Check of range of differences in averaging
GNSS: Leica antenna selectable
GNSS: Improvements for NTRIP (Javad and Topcon)
Last selected project under CE gets highlighted at the next start
GNSS: Quicksave by check button
Deleting a datum available
DTM: Output data is selectable
GNSS: RTK RESET for Leica with GPS 1200 (beginning with Firmware 8.1)
Totalstation: New driver (GTS800AEXT2) for GPT9000 with RC3
Interface: AT GIS-GRID

Version 3.00.08 - 10.12.2010

Totalstation: Levelling for Leica Geocom
GNSS: Javad Alpha

Version 3.00.07 - 27.08.2010

Innovation: GART-2000 CE for Smartphones (WM 6.5)
GNSS: Enhancements of GSM for Leica

Version 3.00.06 - 04.08.2010

Innovation: DTM calculation, volume calculation and setting out by DTM height (GART-2000 NT)
Innovation: Polar excentre for totalstations
Totalstation: Points are selectable by a coordinate list for setting out
Import/Export Formats: Import of splines with DXF
GNSS: Enhancements of the NTRIP client

Version 3.00.05 - 18.06.2010

Innovation: Order of point number by number or character selectable
Innovation: Now possible to set all transformed coodinates with AcP "R" in the "transformation coordinates" dialog

Version 3.00.04 - 29.04.2010

GNSS: Sound for fixed/fixing lost
Totalstation/GNSS: Buttons F9 to F12 of Leica CS15 usable
NRW Version: Protocol for GPS measurement now with selection of UTM- or cartesian coordinates
Import/Export Formats: Export freeform now for Archer and Allegro CX (Juniper Systems) available

Version 3.00.03 - 12.04.2010

Platform: Interface to Topcon GRS-1
Innovation: Terminal to log and display communication between GNSS receiver or totalstation and GART-2000
Import/Export Formats: choice of background colour for DXF available

Version 3.00.02 - 06.03.2010

Totalstation: Enhancements for setting of azimuth and station coordinates of Leica 1200 TPS series

Version 3.00.01 - 22.02.2010

Graphics: new start screen
Interface: BeTA2007 (Bundeseinheitliche Transformation für ATKIS)

Version 3.00.00 - 03.02.2010

GNSS: Interface to Leica Viva series
GNSS: Improvement for Bluetooth with Leica RX1250 and CS10/15
GNSS: GLONASS - Base Station Type / Automatic Manufacturer Detection for Topcon (starting Firmware 3.4)
Geoid models: bicubic and cubic spline interpolation

Version 2.12.08 - 01.02.2010

GNSS: Interface to Sokkia GSR2700 ISX

Version 2.12.07 - 18.11.2009

Innovation: Client to use ePP-NET by ascos (automatic postprocessing service)

Version 2.12.05 - 01.09.2009

GNSS: Improvement for Leica
Setting out: Improvements with GPS setting out
GNSS: Deactivation of single Satellites available (Topcon and Javad)
Totalstation: Improvements (especially for Leica Geocom)
Setting out available with offset

Version 2.12.04 - 29.07.2009

GNSS: Status of GNSS solution now with colour
Import/Export Formats: Improvements for the german cadastral protocols

Version 2.12.02 - 25.06.2009

GNSS: Improvements for Hemisphere Vector
Totalstation: Reflectorless measurement for tachymetric set available
Totalstation: Change orientation available (Leica TCA2003 and Geocom)
Totalstation: Improvement for tachymetric set

Version 2.12.01 - 08.05.2009

Larger dialogs under GART-2000 NT
Innovation: Raster and picture manager under GART-2000 NT
Innovation: GIS Input dialog under GART-2000 NT

Version 2.12.00 - 08.05.2009

GNSS: Interface to Javad GISmore
Innovation: Notes as text available
GNSS: DFHBF improvement for Topcon FC-200

Version 2.11.07 - 03.04.2009

GNSS: Improvements for the North Rhine-Westphalia protocol

Version 2.11.04 - 13.01.2009

Graphics: Import of Jpeg, Tiff und Geotiff available
Innovation: 2-Parameter-Transformation

Version 2.11.03 - 05.01.2009

GNSS: Improvements for Topcon GR-3

Version 2.11.01 - 02.12.2008

GNSS: Improvements for Javad Triumph (GSM dial, Skyplot)

Version 2.11.0 - 15.10.2008

Platform: TDS NOMAD
Coordinates: Display of geographic Coordinates (GART-2000 NT)
GNSS: Improvements Javad Triumph (GLONASS calibration, GSM, NTRIP)
Totalstation: Topcon GPT 8000

Version 2.10.15 - 18.09.2008

Innovation: Saving and loading of profiles for GNSS and totalstations available

Version 2.10.14 - 04.09.2008

Interface: Leica Disto A6
Calculate: Calculate arc improved
Interface: XtraLight for determination of Lower Saxony parameters
Import/Export Formats: rmView

Version 2.10.13 - 17.06.2008

Import/Export Formats: CUBIS
Import/Export Formats: DA001

Version 2.10.12 - 21.03.2008

Platform: Archer by Juniper Systems
Platform: Thales MobileMapper CX
GNSS: GNSS update rate up to 5 Hz, for RX1250 up to 10 Hz
Geoid models: N60 and N2000 (Finland)
Import/Export Formats: EDBS improvements for Lower Saxony

Version 2.10.11 - 21.11.2007

Import/Export Formats: Geograf Import/Export under GART-2000 CE

Version 2.10.10 - 22.10.2007

Import/Export Formats: Protocol tachymentric set under GART-2000 CE
Innovation: Calculation of an arc for offset measurements with GNSS
Import/Export Formats: Import of Shapefiles

Version 2.10.7 - 11.07.2007

Version (Lower Saxony): Improvements

Version 2.10.6 - 28.06.2007

GNSS: Internal radio with Leica RX1250
Totalstation: Tracking with Leica TPS1200
GNSS: Enhancements for Leica (Initialization, additional Properties like Sat-System, Multipath-Red., Track-Mode, Measurement Configuration)
GNSS: Choice of correction data formats
Innovation: Choice of Real Time equipment
Innovation: Choice of Real Time ports
Version (Lower Saxony): Improvements

Version 2.10.5 - 21.04.2007

GNSS: Enhancements for Sokkia (GSM)

Version 2.10.4 - 19.04.2007

Import/Export Formats: Improvements DXF

Version 2.10.3 - 3.04.2007

Platform: DAP CE8640
Import/Export Formats: Google Earth

Version 2.10.2 - 27.02.2007

Calculate: GNSS offset with auxiliary line by 2 GNSS auxiliary points

Version 2.10.1 - 21.02.2007

GNSS: NTRIP for Leica SmartRover
Totalstation: Improvements for Leica SmartStation
Import/Export Formats: Enhancements for the list about a "Fortführungsriss" of SAPOS (Lower Saxony)

Version 2.10.0 - 12.02.2007

GNSS: Improvements for Leica SmartRover (GPS1200 and RX1250)

Version 2.02.7 - 18.01.2007

GNSS: Optimization for NTRIP with Topcon HiPer via internal GPRS modem
GNSS: Interface to Topcon GMS-2
GNSS: Interface to Thales MobileMapper CE
GNSS: Correction data via Direct-IP
Calculate: Optimization geodetic line determination

Version 2.02.6 - 21.12.2006

GNSS: Support come2ascos
GNSS: Deactivation of NMEA/GGA output for the radio port
Totalstation: Enhancements for traverse
Plattform: Improvements for Topcon FC-200
Geoid models: Integration of IGG2005 for Spain and Portugal
Geoid models: Integration of LV98 for Latvia
Geoid models: Integration of Kärnten geoid
Geoid models: Integration of Austria Geoid
Projection integration: Enhancements for Finland
Calculate: Enhancements for fitting straight line

Version 2.02.5 - 16.09.2006

GNSS: NTRIP for Topcon HiPer via internal GPRS modem
GNSS: Individual fine tuning via scripts for Topcon/Javad and Sokkia
GNSS: Display for PDOP, HDOP and VDOP for Topcon/Javad
GNSS: Optimization for Bluetooth, especially for Topcon FC-100/FC-2000

Version 2.02.4 - 07.08.2006

GNSS: Enhancements for GSM protocol with analogue und digital Dial (SAPOS)
GNSS: Enhancements for USB driver for Topcon/Javad

Version 2.02.3 - 10.07.2006

GNSS: Optimization for Bluetooth

Version 2.02.2 - 07.07.2006

Geoid models: Interface with GCG05 for Germany
Import/Export Formats: COD format with filter

Version 2.02.1 - 29.06.2006

GNSS: Optimization for COM-Port with GSM
Interface: GIS coupling with University Wien

Version 2.02.0 - 27.06.2006

GNSS: rounding error with GNSS datum for the North Rhine-Westphalia protocol corrected (GART-Viewer)
GNSS: Control for datum for the North Rhine-Westphalia protocol

Version 2.01.9 - 31.05.2006

GNSS: Internal improvements for the GNSS datum for the North Rhine-Westphalia protocol
Totalstation: Interface for Nikon
Internal improvements for Topcon FC-100

Version 2.01.7 - 16.04.2006

GNSS: Enhancements for Leica GX1230 and Leica SR530

Version 2.01.6 - 04.04.2006

GNSS: Enhancements for static recording for Topcon/Javad
Import/Export Formats: Zeiss M5 export
Import/Export Formats: Enhancements for DXF export under Windows CE

Version 2.01.5 - 13.03.2006

GNSS: Optimization of the NTRIP client for Husky fex21
GNSS: Improvements for the new USB driver of Topcon/Javad

Version 2.01.4 - 31.01.2006

GNSS: Improvements for static recording for Topcon/Javad

Version 2.01.3 - 15.01.2006

Totalstation: Improvements for local measurement
Import/Export Formats: Special version UTM Zone 32

Version 2.01.2 - 18.12.2005

GNSS: Improvements of the quick start buttons for dial and hang up with Bluetooth and Hiper+
GNSS: Integration of the Base button for Bluetooth dial with Q200 and HiPer+
Interface: Enhancement of the Intergraph coupling
Import/Export Formats: Enhancement for KW Grevenbroich
Graphics: Improvements for automatic line drawing with choose of type of line

Version 2.01.1 - 23.11.2005

GNSS: Optimization of Bluetooth for Itronix Q-200 and Topcon FC-2000/FC-100

Version 2.01.0 - 21.11.2005

GNSS: Optimization of the external NTRIP client

Version 2.00.9 - 25.10.2005

GNSS: Leica improvements for SMARTgate/GSM
GNSS: Optimization of the Rover initialization with Bluetooth for Topcon/Javad on Itronix Q-200

Version 2.00.8 - 19.10.2005

GNSS: Internal improvements about the GNSS datum for the North Rhine-Westphalia protocol

Version 2.00.7 - 06.10.2005

Import/Export Formats: Improvements of the KOF format for the Norwegian version
GNSS: DFHBF improvements for Topcon FC-2000

Version 2.00.6 - 30.09.2005

GNSS: Improvements for the Bluetooth interface

Version 2.00.5 - 27.09.2005

Interface: Improvements for the coupling with GEOgraf (averaging in GART-2000)
Import/Export Formats: Improvements of the KOF format for the Norwegian version

Version 2.00.4 - 27.09.2005

Totalstation: Functionality of alignment and setting out enhanced
Totalstation: Update of protocols for setting out and alignment

Version 2.00.3 - 23.09.2005

Interface: Optimization communication with Gispad

Version 2.00.2 - 19.09.2005

Language integration: Supplements in Norwegian

Version 2.00.1 - 15.09.2005

GNSS: Optimization NTRIP client

Version 2.000 - 28.02.2005

GNSS: Internet corrections with integrated NTRIP-Client (also under Windows CE)
GNSS: Improvements for Bluetooth communication
GNSS: New Interface to Septentrio
GNSS: Topcon RTCM 3.0 and USB support, Base-Setup with firmware 2.4
GNSS: Sokkia Prudency Mode, SBAS support
GNSS: Navcom Support for GSM-control, radio modem configuration, Quickstart for Starfire
GNSS: Leica Support for GPS1200 series
Totalstation: Improvements for control of Topcon GPT-series with RC-2
Totalstation: Interface to Leica TPS1200
Road Module: Import, Editing and Setting Out of Axis and Gradients in Real-Time
CoGo functions: 3D-detail points, Parallel shift, Move point to line, Building construction, Circumference calculation
Onlinetransformation RDNAPTRANS2004 for Netherlands
Projection integration: S-42 und Stereographic for Rumania
Language integration: Serbian
Improvements for German cadastral version NRW with GPS Excel-list
Platform: Integration of Windows CE controllers Topcon FC-100/FC-2000, Itronix Q-200, TDS Recon (PPC 2003) and Juniper Allegro CX
New Keypad with Quick-Editor Field

Version 1.450 - 05.12.2003

GPS: Internet-corrections with NTRIP-client
GPS: Machine module for vibratory rollers
GPS: Depth sounder module for hydrographic surveys
GPS: Topcon Map-R and OmniSTAR support
GPS: Sokkia Log Refstation for DRef, SDR-format, vector
GPS: Interface to Navcom
GPS: Logging of NMEA messages
Totalstation: Improvements for control of Topcon GPT8000-series with RC-2II
Geoidmodels: EGM96, models for Norway, Sweden, Denmark and Estonia (KMS)
WALCORS parameters for Belgium
Export formats: TCO/OBS formats for MOVE3
Projection integration: Pulkovo 1942 for Russia
Improvements for German cadastral version NRW with GPS Excel-list

Version 1.440 - 05.05.2003

GPS: Dynamic Transformation Trans-It
GPS: Interface to Leica
GPS: Calculation of a local 7-parameter transformation
GPS: User defined projections
GPS: Topcon/Javad L1/L2 antenna offsets
GPS: Topcon/Javad correction format JPS
GPS: Topcon/Javad display of battery status
GPS: Topcon/Javad position update rate 2 Hz (GART-2000 CE) and 5 Hz (GART-2000 NT)
Totalstation: Improvements for control of Topcon GPT8000-series with RC-2II
Totalstation: Improvements for control of Trimble 5600
Language integration: Hungarian
Import/Export Formats: GRIPS and GPS export of LLH-coordinates and XYZ-measurements
Improvements only in GART-2000 NT: Symbol and colour editor for display of points and lines
Interface: GIS-program EVA MOBIL from DGIS
Interface: GIS-program webGIS from emprise
OSTN02/OSGM02 Onlinetransformation UK
OSi/OSGM02 Onlinetransformation Ireland
OSNI/OSGM02 Onlinetransformation Northern-Ireland
Geoidmodel for Berlin
German cadastral version NRW with GPS Excel-list

Version 1.420 - 28.10.2002

GPS: Improved telephone control
GPS: Topcon/Javad control of internal GSM-modem
Totalstation: Support of Topcon RC2
Totalstation: Support of Trimble 5600 and Elta 40/50R
Totalstation: Improvement of tachymetric set measurements
Language integration: Swedish
Projection integration: USA (NAD83, all State Plane Coordinate Systems (SPCS)), Hungary (HD-72, EOV), Ghana (Leigon, Ghana Metric Grid) and Greece (GGRS87)
Import/Export Formats: SDR33, Cremer, Stratis and VPR ODA
Improvements only in GART-2000 NT: Check for identical points, Database Backup functionality and Output line informations
RDNAPTRANS + De Min Geoid for Netherlands
FLEPOS for Belgium
Dialog adjustments for Pocket-PC
Check double measurements
Platform: Integration of Siemens Mobic

Version 1.410 - 31.05.2002

GPS: Interfaces to: Sokkia/Novatel and Thales
GPS: Topcon/Javad automatic switching between radio and GSM
GPS: Topcon/Javad RTCM 2.3 format supported
Language integration: Polish and Dutch
Projection integration: Poland, Sweden, Luxembury, Austria, Lithuania and USA (California, Illinois), PTS-Format for UK
Platform: integration of Symbol PDT8100

Version 1.400 - 12.02.2002

Rasterdata: Bitmap display + georeferencing (Release)
Input of graphical coordinates (digitizing)
GPS: Online-Transformation OSTN97/OSGM91 for UK
GPS: Online Height-transformation with DFHBF-DLL for GART-2000 NT
GPS: Geoidmodel-Interface (EGM96, EGG97, CHGEO98)
GPS+Totalstation: Storage of side shots
Totalstation: Automatic Tracking with display of calculated coordinates (for TOPCON GTS800- Series)
Language integration: Portugese
Projection integration: Portugal, Croatia, Serbia and Turkey

Version 1.350 - 20.08.2001

Rasterdata display (Beta)
Multilanguage support for all versions
GPS: DFHBF-module (Beta)
GPS: TPS/Ashtech reference station shift
GPS: TPS static recording: Automatic File Rotation Mode and Download files receiver > controller
GPS: TPS RTCM AdV module
GPS setting out: heights, detail points, alignments, arcs
GPS: display geogr. WGS84 coordinates in GPS-measurements dialog
Calculate: sidesection, tangent to circle, building
Interface: GIS-programm PRO OPEN by Kirchner
Import/Export Formats: COD (comma delimiter), LLH (geogr. lat,lon,height)